Placa Atlantis PCI 2p. RS 232

PCI Bus card
Support both 3,3V and 5V PCI connector so suitable for PC and Servers.

PCI Express Bus cards
Compliant PCI Express 1x


Serial port specification
Fast Serial RS232 DB9 port
Serial Port Data rates up to 4Mbps per port
PCI compatible Dual UART (16C450/550/552)
PCI compatible Quad UART (16C550) for 4 Serial port
16-byte transmit-receive FIFO (UART)
Programmable Baud rate generator
Modem Control Signal
5,6,7,8 bit character selection

Parallel port specification
DB25 Printer Port
PCI compatible IEEE 1284 Printer Port
Support SPP, Nibble, Byte, PS2, EPP, ECP, Multimode
Fast data rate up to 2MB/s for PCI and 1,5MB/s for PCI-Express


Raid Controlles

PCI express
2 x SATA 3 Gb/s Port- 1 x ATA133 Channel (max. 2 HDD)
Max. 3 Gb/s transfer rate per SATA port- Support both SATA 1.5 Gb/s and 3 Gb/s HDDdrives
PCI Express Base specifi cation rev.1.0a compliant- Serial ATA AHCI specification rev.1.0 compliant
Serial ATA High Speed Serialized AT Attachmentrev. 1.0a compliant
Serial ATA II : Extensions to Serial ATA 1.0aRev.1.1 complaint- Gen2i and Gen2m Serial ATA II Electrical specification
rev. 1.0 complaint
Bus master programming interface for IDE ATAcontroller compliant
Support RAID 0, 1, 0+1, JBOD or Non-RAID modes
Supports Native Command Queue(NCQ)
Support Hot Plug
Drivers support Windows 7, 2000, ME/XP/VISTA, MAC OSX 10.4.3, Linux, Unix SCO/Solaris

PCI
1 x ATA133 IDE Channel; 2 x SATA 1.5 Gb/s IDEPort
PCI specification v2.2 compliant
PCI Power Management Interface specification v.1.1 compliant
RAID 0, 1, JBOD or Non-RAID modes support
ATA IDE & SATA IDE RAID Drivers support Windows 98SE or above-
ATA133 :
Max. 2 IDE HDD support
Support ATA PIO mode 4, multi-word DMA mode, &UDMA mode
6- ATA/ATAPI-7 compliant SATA :
Serial ATA specifi cation rev. 1.0 compliant- Max. 1.5 Gb/s transfer rate per SATA port